Non-Destructive Testing (NDT) Equipment Manufacturers

Thermal imaging NDT uses infrared cameras to detect temperature variations on or beneath a material's surface. Defects such as delaminations, voids, or moisture ingress disrupt heat flow, creating detectable thermal anomalies. Techniques include Flash Thermography, Lock-In Thermography, and Vibro Thermography. MoviTHERM's cameras deliver ±2°C accuracy with NETD as low as 30 mK for precise detection.

Thermal imaging NDT is widely used in aerospace and defense for composite inspection, electronics manufacturing for component thermal analysis, automotive and battery manufacturing for weld and cell inspection, energy and utilities for infrastructure monitoring, food processing for quality control, and R&D laboratories for scientific thermal characterization.

Resolution requirements depend on target size and inspection distance. For small electronic components, 320×240 (FLIR A400) or 464×348 (FLIR A500) may suffice, while detailed surface inspections benefit from 640×480 (FLIR A700 or IRSX IRS640). FLIR Macro Mode and high spatial resolution (IFOV as fine as 0.84 mrad/pixel) enable precise measurements on miniaturized targets.

Yes. MoviTHERM's thermal cameras support a broad range of industrial protocols including Modbus TCP, EtherNet/IP, MQTT, OPC-UA, Profinet, GigE Vision, and ONVIF, enabling seamless integration with HMI/SCADA systems, PLCs, VMS platforms, and IoT networks. The IRSX Smart Camera requires no programming and uses a web-based configuration interface for rapid deployment.

All cameras in MoviTHERM's NDT portfolio deliver ±2°C (±3.6°F) or ±2% of reading measurement accuracy under standard ambient conditions (15°C–35°C). The FLIR A-Series cameras feature NETD as low as 30 mK, ensuring highly sensitive detection of subtle thermal anomalies critical for quality assurance and defect identification in manufacturing environments.

Yes. The FLIR A50/A70 and A400/A500/A700 Image Streaming models carry IP66 ratings, while the proprietary IRSX Smart Camera is rated IP67 per IEC 60529, protecting against dust ingress and water jets. All models use rugged M8/M12 industrial connectors and are tested for shock and vibration compliance per IEC 60068 standards, ensuring reliable operation in demanding plant environments.