FLIR Thermal Imaging Cameras — 640x480 Resolution

All FLIR 640x480 cameras in this range provide ±2°C (±3.6°F) or ±2% of reading accuracy, whichever is greater. This applies under standard ambient conditions of 15°C to 35°C with object temperatures above 0°C. This level of accuracy is suitable for non-contact temperature monitoring in manufacturing, electronics testing, and process control.

NETD (Noise Equivalent Temperature Difference) measures how small a temperature difference a camera can detect. The FLIR A700 Science Kit achieves NETD as low as 30 mK, while the A50/A70 Smart Sensor and Image Streaming cameras reach below 35–45 mK depending on lens. Lower NETD means the camera can detect finer thermal differences, improving early fault or hotspot detection.

Yes. Models such as the FLIR A400/A500/A700 Smart Sensor and FLIR A50/A70 Smart Sensor support Modbus TCP, EtherNet/IP, MQTT, REST API, and ONVIF S protocols, enabling direct integration with HMI/SCADA systems, VMS platforms, and IIoT cloud solutions like MoviTHERM's iTL monitoring software.

Smart Sensor cameras perform on-camera edge analytics — processing temperature alarms and measurement results at the camera level without a host PC. Image Streaming cameras stream raw or radiometric video to external software (GigE Vision/GenICam) for processing. Smart Sensors are ideal for automated monitoring; Image Streaming suits machine vision and custom application development.

Yes. The FLIR A50, A70, A400, A500, and A700 series cameras (excluding the A700 Science Kit at IP54) carry an IP66 ingress protection rating, protecting against dust and high-pressure water jets. They also comply with IEC shock and vibration standards, and operate across a wide temperature range, making them suitable for demanding industrial and outdoor deployments.

These cameras support Gigabit Ethernet (GigE Vision, GenICam), RTSP video streaming (H.264, MPEG4, MJPEG), and optional Wi-Fi (IEEE 802.11a/b/g/n). Advanced configurations support compressed radiometric JPEG-LS streaming, reducing bandwidth by up to 90%. Power over Ethernet (PoE IEEE 802.3af Class 3) simplifies installation with a single cable connection.