About MoviTHERM

This author has not yet filled in any details.
So far MoviTHERM has created 156 blog entries.

Seal Inspection Using Thermal Cameras

Seal Inspection Using Thermal Cameras in Your Process Line

Many packages for food, medical, pharmaceutical, supplies and other goods are packaged in bags that are being sealed using heat. Thermal bag seal inspection refers to using a thermal camera to inspect the heat signature of the bag seal, immediately after sealing.

There are several different methods of how the bag seal is being heated, but ultimately all lead to the same result. Two materials are being joined together forming a (hopefully) tight package seal.

How is a thermal seal created?

Thermal bag sealing or package sealing refers to a sealing concept that either heats up plastic materials to their melting point, thus allowing the materials to fuse together. Some package seal designs have a predetermined adhesive area to form the seal.

Induction Sealing of Bottle Caps

This method is commonly used in bottle cap applications. In case of the bottle cap seal, a liner is being inserted into the cap, prior to capping the bottle. The liner may be an aluminum foil or contain a layer of cardboard. The liner is coated with an adhesive that is facing towards the bottle. After the cap has been screwed onto the bottle, the bottle travels underneath an induction heater. The aluminum foil is now being heating by the eddy currents generated in the magnetic field of the coil of the induction heater while the bottle travels down a conveyor. The aluminum foil heats up and melts the adhesive. The pressure from the torqued cap assured that the cap liner adheres to the bottle after the adhesive has cooled down.

Platen Heat Sealers

Another common heat-sealing method is using heated plates. These plates are formed in the shape of the package seal area. Typical package designs are cups or containers with a plastic foil on top. The packages come down a conveyor line and the heated plate sealer pressed down onto the top foil transferring its heat into the package seal area.

Band Sealers

Band sealers are often found in continuous bag sealing applications. These allow the bags to be in motion during the sealing process. The bag is moved through the band sealer while the sealer transfers heat onto the bag seal.

Ultrasonic Sealers

Another common sealing technology for bag sealing uses ultrasound to create heat directly in the seal. This is commonly found in paper bag applications. Since paper does not melt together, an adhesive layer has been applied to the bag seal during the manufacturing process of the paper bag. The paper bag is then being inserted into the jaws of the ultrasonic sealer. A short burst of very powerful ultrasound energy is induced into the bag seal area. This causes the adhesive-covered bag seal areas to vibrate. The friction together with the vibration creates heat, which in turn melts the adhesive and forms the bag seal. All of this happens in a fraction of a second.

There are other bag sealing and package sealing methods and technologies besides these. For example Friction welding, Radio Frequency (RF) welding, and Laser welding to name a few. The previous examples are just some common examples found in the packaging industry.

The Need for Inspection

First off, not every package seal is critical. Therefore, not every package sealing application requires rigorous inspection.

Thermal imaging-based inspection systems are suited for critical packaging applications. Critical applications are applications in which a weak seal, an impartial seal, or even a small leak would lead to significant issues.

Sometimes these issues are related to product quality and have cosmetic reasons, other times the risk is much higher, such with maintain sterility in medical applications.

Thermal bag seal inspection offers a unique advantage, as it is a non-contact temperature measurement method.

However, based on the thermophysical properties of the materials used for the bag seal, the inspection can be challenging. Some materials are not suitable for thermal imaging-based inspections at all, such as certain metal films which may be highly reflective in nature. Even if the package material does not look very shiny to the human eye, it may still be problematic to inspect with a thermal imaging camera. This all comes down to physics and material properties, emissivity, transmission and reflection.

“It is for that very reason, that we here at MoviTHERM always start every bag seal application with a feasibility study. That allows us and our customers to properly evaluate how the materials behave in the infrared spectrum and whether the inspection application will work, before investing a lot of time and money.” – adds Markus Tarin, President & CEO, MoviTHERM

The Importance of the Inspection Location

Every thermal bag sealing application behaves differently and is sometimes unpredictable. Even if it has been determined that the thermophysical properties of the bag seal allow for reliable temperature measurement, there are still other challenges that need to be tackled. Depending on the level of heat input, the sealing temperature, as well as the physical mass in the sealing area and heat conductivity of the material, the heat in the seal, will spread at a different rate.

Thermal image time sequence of heat seal.

The above pictures are thermal images taken from an ultrasonically welded seal. This time series illustrates how the thermal signature of the weld area changes over time. The first image (t=0 sec) has been taken immediately after the weld. In the last image (t=3.0 sec) you can see that the heat signature has significant changes.

Why does this matter?

Well, the more time passes from the time heat was induced into the bag seal, the more the heat signature diffuses. A side effect of that thermal diffusion is that the heat signature of the seal washes out and becomes very blurry. The heat energy from the hotter regions flows towards the colder regions.

So, if there is an area in the seal that wasn’t sealed properly, it tends to be colder than the surrounding regions. The thermal contrast this creates can be used to detect the defect in the bag seal. However, that thermal contrast starts to fade away, making the defect detection less reliable as time passes.

Application Story – Paper Bag Seal Inspection

To put all of this into context, let’s take a look at a real-world bag seal inspection application. The following example used a thermal camera and custom-developed thermal imaging software. The paper bags are being sealed with an ultrasonic sealer. Once sealed, the bags are being dropped onto a conveyor belt. A proximity sensor detects the bag and triggers the thermal camera. The thermal imaging software analyzes the heat signature of the bag and determines whether the seal is good or bad.

Paper pouch sealing setup.

The photo above shows the test setup. Visible are the ultrasonic bag sealer, the conveyor belt, the paper bag with the seal facing forward, the FLIR Thermal camera, and an industrial PC running the custom thermal bag seal inspection software.

Thermal Bag Seal Inspection – Conceptual Setup

The following illustration shows the setup that was used for the inspection setup. A proximity switch was used to trigger the thermal camera always at the right time after the sealing process.

Paper Pouch Seal Inspection Setup – Conceptual

Determining the right time window for snapping the thermal image of the seal is crucial. Sometimes it actually takes some time for the heat to rise to the surface of the material. So taking the image either too early or too late will not yield satisfactory results.

The black and white image series is a thermal time series. We essentially stopped the conveyor belt. We then extracted six thermal images of the bag seal. The first image at t=0 sec, then t=2 sec, t=5 sec, t=8 sec, t=12 sec and the last at t=15 seconds.

The thermal signature of the seal between 0 to 5 seconds after sealing is still nicely pronounced. This seal is made up of two horizontal lines. Starting with image four (t=8 sec) the double line feature is starting to bleed.

Performing any meaningful thermal image analysis after 5 seconds will become very challenging.

This test helps us to determine where to place the thermal camera with respect to conveyor speed and the material-dependent behavior of this particular paper bag sealing application.

Paper pouch seal image sequence.

Pass-Fail Detection with Respect to Inspection Location

The temperature equalization from warmer regions to cooler regions can result in a bad seal eventually appearing to be a good seal. This thermal equalization effect is graphically illustrated in the 3 images on the right. In a thermal bag seal inspection application, it is important to capture the image soon after the seal is applied.

The sooner the exposure, the more likely the inspection can catch the faults – before equalization can hide them. The light red regions represent the heat signature on the bag seal area that is above a certain temperature threshold.

The detected gap is a faulty seal area where there is insufficient heat present. This would lead to a broken or incomplete seal and may cause product to leak out or moisture to creep into the product.

Correctly understanding this thermal diffusion effect makes the difference between being able to properly identify sealing defects or not.

Pass-Fail Detection

Good Seal Example

The example image below shows a thermal image (vertical seal orientation) and the corresponding processed image. A common machine vision processing step, called “image threshold” was applied to create a blob image. A blob image is a binary image with all pixels turned on that are above a certain threshold. The threshold in this example is directly related to the seal temperature.

What one would expect from a good seal is a continuous red area in the shape of the seal. Additional evaluation functions can be applied to further examine the quality of the seal. For example, one could measure the width along the sealing region and the length. Other options are looking for any orphaned blobs of disruptions.

The inspection strategy mainly depends on how the material behaves and how repeatable the results are. This is also impacted by dynamic behaviors of the sealer. During startup, the seal temperature may still be changing as the sealer warms up.

Good seal example.

Faulty Seals Example

Depending on the application, there are several failure modes. It is good engineering practice to characterize the different failure modes to properly understand how these impact the heat signature of the seal.

Infrared image examples of faulty seals.

Common Challenges in Thermal Bag Seal Inspection Applications

There are plenty of challenges with thermal bag seal inspection applications. These stem from the sealing methodology, the thermophysical properties of the material, ambient and environmental conditions, and dynamic behaviors.

The list below is a summary of commonly encountered challenges in bag sealing applications:

Specific Thermal Conductivity (Rate of thermal diffusion)
Emissivity (Ability of the material to radiate heat)
Reflectivity (Low emissivity surface, reflections)
Transmissivity (Certain coatings and thin film plastics)
Motion blur due to fast moving parts
Aspect Ratio of sealing area vs. sealing width (Resolution problem)
Ambient Temperature fluctuations
Process drift (Start up, dynamic conditions etc.)

MoviTHERM2024-08-16T17:24:19-07:00Thursday, March 21, 2024|Blog|

Flash Thermography NDT Technique

Flash Thermography is an active thermography method for the non-destructive evaluation of materials. Non-destructive evaluation (“NDE”) or non-destructive testing (“NDT”) are often used interchangeably. Flash thermography is considered an active thermography inspection method, because the part under test is commonly at ambient temperature. Examining the part with a thermal camera would not produce any contrast in the image, since there are no significant temperature differences across the part surface. In comparison, using a thermal camera to “passively” look at an electrical motor would yield a high degree of thermal contrast in the image, due to the self-heating of the motor during operation.

Example of a Flash Thermography System

A flash thermography system uses its own heat source to induce heat into the part. This is done to allow an active examination of the thermal behavior at the surface of the part. The “flash” part of a flash thermography system in this case, is considered the excitation source. The flash lamp creates a short, high-energy heat pulse which is directed at the surface of the part.

The flash duration is often on the order of 2 milliseconds or less. The objective is to illuminate and therefore heat the part surface captured by a thermal camera as evenly as possible. The thermal camera records the changes in surface temperature by capturing a thermal video, consisting of many image frames. The software of the flash thermography system then post-processes that thermal video sequence and performs complex math on a pixel-by-pixel basis. The created thermal wave penetrates the part in depth and travels back to the surface, which is being observed by the camera.

In a homogeneous region of the part with no defect, heat travels at the same rate. However, an area with a defect, such as a delamination, void or foreign material inclusion, disturbs the thermal wave on the surface. These temporal changes or differences of the thermal wave are being converted to contrast changes in the result image. Different mathematical algorithms have been developed to accomplish this. Some work better for fast responding materials, such as metals, and others work better for materials that don’t conduct heat very well, such as carbon composites or plastics.

Example Configurations of Flash Thermography Systems

The photos below show different configurations of flash thermograpy systems. From left to right: The first photograph shows a high-end system that was developed for a military application. All systems components are integrated into military style flight cases. That particular system was equipped with six flash generators (blue devices). Each generator delivers 6 kJoule of flash energy for a total of 24 kJoule. The photo next to it shows a combination flash thermography system with transient thermography capability. That system is integrated into a standard flight case with casters. The photo to the right shows a FLIR camera on a tripod next to a flash lamp on a tripod. The setup was used to inspect aircraft propellers for defects. The photo on the very right shows a result image from one of the propellers with an edge defect – a delamination.

flash thermography system millitary MoviTHERM flash thermography system in flightcase flash thermography of propeller blades flash thermography result of propeller blade delamination

How is a flash thermography measurement performed?

The following video shows an overview and demonstration of our flash thermography system. For this demonstration we were using a pre-impregnated (“Prepreg”) carbon composite sample with three plies. Inside the sample there was a triangular piece of poly-film to simulate a defect or foreign object (“FOD”). This is a very typical scenario in today’s composite manufacturing industry. Smaller pieces of poly film sometimes get stuck or left behind from the backing material of the prepreg. The leftover piece of the peel-ply then becomes part of the carbon-composite layup or sandwich. Depending on the size of the FOD, this may lead to structural issues in the finished part. This is especially true for carbon composite structures that are exposed to high-stress. These pieces of peel-ply typically go unnoticed until much later, when the finished part is undergoing a final non-destructive test regimen, typically with ultrasonic testing. Detecting FODs this late can become very costly, as some parts may have to be scrapped.

Flash Thermography on the other hand, can be applied to the uncured prepreg and provides a quick verification of the layup prior to curing the part. Typically, a flash thermography system can detect FODs to about three plies deep. The heat injected into part from the flash is negligible and will not start the curing process prematurely.

A measurement only takes a couple of seconds, as can be seen in the video. This process can be further automated for larger and curved parts, using a collaborative robot and some of MoviTHERM’s automated image processing solutions.

Flash Thermography is very well suited for surface and near surface defects. However, it is very depth limited in materials that do not conduct heat very well, such as composites. The maximum penetration depth is typically around 1.5 to 2 mm for such materials. If the material thickness exceeds 2mm, we recommend switching to a transient thermography solution instead.

Signal Processing – The key to achieving good results!

The photo below shows a result image of a flash thermography measurement. The sample is a carbon composite coupon with flat holes of different depth. Two cursors have been placed on the image to measure temperature vs. time. The red cursor has been placed (baseline) over a non-defective area. The corresponding graph is blue. The green cursor has been placed over a “void”, represented by a flat hole. The graph color for this cursor is orange.

At time time zero, the flash introduces a sharp rise in temperature over the non-defective area as well as over the void. When the part starts to cool off, the orange graph clearly departs from the blue, indicating a different cooling behavior. The two graphs meet again when the part has reached equilibrium around ambient temperature. The difference in the rate of cooling is being exploited with an advanced signal processing technique. In fact, our Flash Thermography system offers several signal processing algorithms to choose from. The signal processing math is applied to every pixel in the image for the entire recorded video sequence.

Areas with different cooling behavior will be converted into a different gray level, resulting in a change in contrast and brightness for non-homogeneous areas in the material. The graph below only demonstrates the signal for two pixels in the image for a simplified illustration. The Y-axis in the graph area calculated units and not temperature. The X-axis are the number of images recorded.

Flash Thermography Temperature Decay

How large of an area can be inspected?

When determining the size of the inspection area, several things need to be considered:

a) The spatial resolution of the thermal camera
b) The size of the flash lamp and the area it can uniformly illuminate
c) The geometry of the part

Spatial Resolution of Camera vs. Smallest Defect Size

The available number of pixels of the camera are being projected onto the part surface. These are contained within the field of view of the camera, which determines the size of the inspection area. For example, a camera may have a detector with 640 x 512 pixels. Any given defect needs to be covered with a minimum of 3 x 3 pixels, ideally more. If the smallest defect size of concern is 0.25″, this would result in 0.25″/3 = 0.08″/pixel. If we multiply this by the horizontal camera resolution, we get the total area we can inspect in one measurement. 0.08″/pixel x 640 pixels = 51.2″. For the vertical size of the field of view, we take 0.08″/pixel x 512 pixels = 40.96″. So the largest field of view size for a single measurement can therefore be ~50′ x 41″.

This is a rather large area. However, we also need to be concerned with how large of an area our flash lamp can cover and produce a uniform heat rise. This may require 2 to 4 flash lamps. With a single flash lamp we can reasonably achieve about 14″ x 12″.

Part Geometry

The part geometry also plays an important role when considering the total size of the inspection area. Curved surfaces can lead to non-uniform illumination of the flash light as well as reflections. Parts with complex geometries may require multiple smaller inspection regions compared to flat surfaces.

Depth Limitation

There are two depth limitations to consider. The first is a limitation due to thermal conductivity of the material. For example, a carbon composite material does not conduct heat very well. A flash lamp discharges all of its energy within 2 msec onto the surface of the part. A purely conducting (heat) material will prevent the thermal wave from penetrating the part very deeply. A rule of thumb is that flash thermography is limited to about 1.5mm to 2.0mm in penetration depth.

The second limitation comes from a ratio of the defect size to its depth in the part.

Depth limitation (diameter/depth) = ~1.4

The 1.4 factor does not consider any advanced signal processing techniques being applied to the result images. So this ratio can be improved to 1.0 to 1.2, depending on various factors. What this ratio says is that the diameter of the defect needs to be at least as large as its depth. However, as we have learned, the penetration depth for flash thermography is often limited much sooner by the thermal conductivity of the material. However, in order to inspect for defects in composites that are located deeper than about 2mm, we can utilize transient thermography instead. Transient thermography allows us to overcome this depth limitation. Another alternative to Flash Thermography is Lockin Thermography.

Example Flash Thermography Application

Defect coupon with flat holes

This is an example application of a flash thermography inspection. The image on the left shows a sample coupon. There are several flat bottom holes drilled into the coupon with varying sizes of diameter and depth. This is a typical test and verification coupon to make sure the flash thermography system is working as expected. It is always a good practice to validate the system with a known standard, before proceeding to inspect critical parts.

The image on the right shows the results from the flash thermography measurement. The holes show up as dark circles. Some of the more shallow ones fade out and some do not show up at all anymore. The ones that do not show up are deeper than about 2mm and exceed the penetration limit of a flash thermography method.

Do you have parts that could benefit from a flash thermography inspection?

MoviTHERM offers NDT Feasibility Studies to help our customers evaluate their application challenges and how well an thermal, infrared non-destructive test method will perform. Learn more about our feasibility study offering!

Download Our Starter Guide

For Infrared NDT Systems

Learn how Infrared NDT works
Learn what type of defects you can find
Learn how large of an area you can inspect
Learn how this method compliments UT inspections
Learn how to save valuable inspection time

Download Now

MoviTHERM2024-08-16T17:24:28-07:00Thursday, March 21, 2024|Blog|

Glossary of Thermography Terms

Absorption

Amount of radiation absorbed by an object relative to the received radiation. A number between 0 and 1.

Ambient

Objects and gases that emit radiation towards the object being measured.

Atmosphere

The gases between the object being measured and the camera, normally air.

Autoadjust

A function making a camera perform an internal image correction.

Autopalette

The IR image is shown with an uneven spread of colors, displaying could objects as well as hot ones at the same time.

Blackbody

Totally non-reflective object. All its radiation is due to its own temperature.

Blackbody Radiator

An IR radiating device with blackbody properties used to calibrate IR cameras.

Calculated Atmospheric Transmission

A transmission value computed from the temperature, the relative humidity of the air, and the distance to an object.

Cavity Radiator

A bottle shaped radiator with an absorbing inside, viewed though the bottleneck.

Color Temperature

The temperature for which the color of a blackbody matched a specific color.

Conduction

The process that makes heat spread into material.

Continuous Adjust

A function that adjusts the image. The function works all the time, continuously adjusting brightness and contrast according to the image content.

Convection

The process that make hot air or liquid rise.

Difference Temperature

A value that is the result of subtraction between two temperature values.

Dual Isotherm

An isotherm with two color bands instead of one.

Emissivity

The amount of radiation coming from an object compared to that of a blackbody. A number between 0 and 1.

Emittance

Amount if energy emitted from an object per unit of time and area (W/m2)

Estimated Atmospheric Transmission

A transmission value, supplied by a user, replacing a calculated one.

External Optics

Extra Lenses, filters, heat shields etc. that can be put between the camera and the object being measured.

Filter

A material transparent only to some of the infrared wavelengths

FOV

Field of view. The horizontal angle that can be viewed through an IR lens.

FPA

Focal plane array: A type of IR detector

Graybody

An object that emits a fixed fraction of the amount of energy of a blackbody for each wavelength

IFOV

Instantaneous Field of View: A measure of the geometrical resolution of an IR camera.

Image Correction (Internal Or External)

A way of compensating for sensitivity differences in various parts of live images and also stabilizing the camera.

Infrared

Non-visible radiation, with a wavelength from about 2-13 microns.

IR

Infrared.

Isotherm

A function of highlighting those parts of an image that fall above, below, or between one or more temperature intervals.

Isothermal Cavity

A bottle-shaped radiator with a uniform temperature viewed through the bottleneck.

Laser LocatIR

An electrically powered light source on the camera that emits laser radiation in a thin, concentrated beam to point at certain parts of the object on front of the camera.

Laser Pointer

An electrically powered light source on the camera that emits laser radiation in a thin, concentrated beam to point at certain parts of the object in front of the camera.

Level

The center value of the temperature scale, usually expressed as a signal value.

Manual Adjust

A way to adjust the image by manually changing certain parameters.

NETD

Noise equivalent temperature difference. A measure of the image noise level of an IR camera.

Noise

Undesired small disturbances in the infrared image.

Object Parameters

A set of values describing the circumstances under which the measurement of an object was made and the object itself (such as emissivity, ambient temperature, distance etc.)

Object Signal

A non-calibrated value related to the amount of radiation received by the camera from an object.

Palette

The set of colors used to display an IR image.

Pixel

A picture element. One single spot in an image.

Radiance

Amount of energy emitted from an object per unit of time, area, and angle (W/m2/sr).

Radiant Power

Amount of energy emitted from an object per unit of time (W).

Radiation

The process by which electromagnetic energy is emitted by an object or gas.

Radiator

A piece of IR radiating equipment.

Range

The current overall temperature measurement limitation of an IR camera, Cameras have several ranges, which are expressed as two blackbody temperatures that limit the current calibration.

Reference Temperature

A temperature which the ordinary measured values can be compared with.

Reflection

The amount of radiation reflected by an object relative to the received radiation. A number between 0 and 1.

Relative Humidity

Percentage of water in the air relative to what is physically possible. Air temperature dependent.

Saturation Color

The areas that contain temperatures outside the present level/span settings are colored with the saturation colors. The saturation colors contain an “overflow” color and an “underflow” color. There is also a third red saturation color that marks everything saturated by the detector indicating that the range should probably be changed.

Span

The interval of the temperature scale, usually expressed as a signal value.

Spectral (Radiant) Emittance

Amount of energy emitted from an object per unit of time, area, and wavelength.

Temperature Range

The current overall temperature measurement limitation of an IR camera. Cameras can have several ranges. They are expressed as two blackbody temperatures that limit current calibration.

Temperature Scale

The way in which an IR image currently is displayed. Expressed as two temperature values limiting the colors.

Thermogram

Infrared image.

Transmission (Or Transmittance) Factor

gases and materials can be more or less transparent. Transmission is the amount of IR radiation passing through them. A number between 0 and 1.

Transparent Isotherm

An isotherm showing a linear spread of color, instead of covering the highlighted parts of the image.

Visual

Refers to the video mode of an IR camera as opposed to the normal, thermographic mode. When a camera is in video mode it captured ordinary video images, while thermographic images are captured when the camera is in IR mode.

MoviTHERM2024-08-16T17:24:37-07:00Thursday, March 21, 2024|Blog|

Advantages Thermal Monitoring Used for 3D Printing

Additive Manufacturing – an Overview

The world of 3D printing, otherwise known as ‘Additive Manufacturing’ (AM) has experienced a significant boost in recent years. The industry is forecasted to grow to approximately 10.8 billion dollars by 2021, up from 2.2 billion in 2012. Modern technology can now print everything from houses to machine parts in 3D. It is expanding well beyond the notion of everyday people printing their individual projects in their own homes into a sprawling industrial sector. 3D printing is massively increasing on an industrial scale.

NASA, for example, has designed two 3D printers to be sent into space to operate in zero gravity for the International Space Station. 3D is also being used in medical applications to create implants and prosthetics. Architectural elements are created to further design capabilities. A multitude of prototypes are being created every day across many industries. These are just as a few examples of the versatility of 3D printing.

Essentially, all 3D printing involves the laying down of various materials from polymers, metals, to fiber ceramics, layer by layer until the printing process is complete. There is a large degree of materials and methods available to print with dependent on the application the printed item is destined for. The various materials used include ABS plastics, PLA, polyamide (nylon), glass filled polyamide, silver, steel, titanium, photopolymers, and polycarbonate.
3d printer hand

Additive Manufacturing Methods

A few of the methods used in Additive Manufacturing include the following:

Fused Deposition Modeling, or FDM: Heats a thin filament of thermoplastic material depositing it layer by layer until the object is completed
Large Scale Polymer Deposition: Heats polymer pellets to their melting point then extrudes these polymers layer by layer until the printing process is complete
Laser Blown Powder Deposition (Laser Metal Deposition): Uses an inert gas to spray metal powder into a melt pool created by a laser.
Electron Beam Melting: Melts metal powder in layers that are bonded with a computer -controlled electron beam.
Selective Laser Sintering: Uses a high-powered laser to fuse small particles of plastic, metal or ceramic into a mass with 3 dimensional properties.

Additive versus Subtractive Manufacturing

The primary advantage of Additive Manufacturing is its cumulative creation process. This provides a much greater flexibility for producing complex geometrical shapes as opposed to taking a piece of raw material and removing from it to create what is needed.

When machining, milling, sawing, filings are involved, all these processes are considered ‘Subtractive Manufacturing’, sometimes called CNC, which produces a considerable amount of waste in comparison to an Additive Manufacturing process.

A 3D Printer Being Monitored by a Thermal Camera

However, both processes have their challenges. While Subtractive Manufacturing may be somewhat wasteful and limited to the “machinable” geometries, Additive Manufacturing also has its downside. Process parameters are much more difficult to control, primarily critical temperatures. Nevertheless, thanks to thermal imaging, Additive Manufacturing can be carefully monitored in order to produce a better product.

Parts manufactured using additive methods, such as 3D printing, can often involve imperfections in the manufacturing process creating issues like open voids, slippage between layers, thermal stresses, and to some extent crystallization of printed materials. Generally speaking, Additive Manufacturing requires a lot of trial and error during a new part setup. With thermal imaging, the printing extruder head and printed materials can be observed as the printing is taking place. This is helping to point out any issues in the process and can help operators fine tune their processes and create a better product.

Thermal Camera Selection for Additive Manufacturing

When selecting a thermal camera for measuring critical process temperatures, several factors need to be considered. First and foremost, the actual printing process and materials involved will determine, which type of thermal camera needs to be employed. For example, in a laser metal deposition application, very high temperatures are present, related to the melting temperature of the metal powders involved. This requires a thermal camera capable of measuring extremely high temperatures without saturating the image detector. Additionally, due to the rapid thermal conductivity in metals, a suitable thermal camera needs to have the capability of very short detector integration times. This is necessary in order to capture rapidly changing temperatures.

When dealing with polymer-based printing processes, these requirements are much more relaxed. Melt temperatures are much lower and so are thermal conductivity of these types of materials. This typically allows the use of much more affordable thermal imaging cameras with microbolometer type detectors.

Thermal imaging cameras can significantly improve the printing process, especially when integrated as a sensory feedback mechanism in a closed loop control for Additive Manufacturing processes. They can also dramatically reduce the setup time of the first article and perform in-situ process monitoring, control as well as quality assurance.

MoviTHERM2024-08-16T17:24:44-07:00Thursday, March 21, 2024|Blog|

Server Room Thermal Monitoring

Information is the lifeblood of modern business. Data continuity and availability is critical to maintaining the integrity our communication networks, security systems, banking, and industrial sectors. When equipment failure strikes a mission-critical data center, costs mount quickly. At large, distributed IT facilities, unplanned failures can cost millions. In smaller, organizations dollar values may be less dramatic, but the loss of productivity and competitive advantage may be significant.

Regardless of the size of your IT installation, there will be a multitude of components that can potentially fail at any time. Electrical connections, cabling, component power supplies, rack units, uninterruptable power supplies (UPS), cooling systems, heat exchangers and other devices all contribute to keeping you data flowing smoothly. An unexpected failure on any node can bring down the entire system. Actively monitoring the integrity of your system components can give you advance warning of trouble, so you can take proactive action, before equipment failures can lead to a costly, unexpected system outage.

Infrared (IR) cameras can be an extremely effective tool for monitoring and predicting electrical equipment failure. When the thermal fingerprint of a component changes unexpectedly, this often indicates that a failure is underway. Deploying IR cameras to monitor your critical equipment can be a very effective first line of defense against unexpected and unplanned downtime.

Figure 1: 100% 24/7 uptime reliability is critical for state-of-the-art server installations.

The MoviTHERM Server Room Thermal Monitoring Solution

In response to the need for 100% server uptime reliability, MoviTHERM has developed an integrated Server Room Monitoring solution. This integrated system solution has been designed to address the specific needs of data center monitoring. Using a combination of advanced thermal imaging and proven, off-the-shelf components, the MoviTHERM Server Room Monitoring system provides all the tools you need to detect problems early — before they turn into costly and potentially critical network failures.

Figure 2: Unexpected “hot spots” in thermal images may indicate signs of trouble.

The FLIR AX8 Camera – Thermal Sensor on Steroids

The FLIR AX8 is a hybrid thermal sensor with advanced imaging capabilities. Combining thermal and visual cameras in a small, affordable package, the FLIR AX8 provides continuous temperature monitoring and alarming for of critical electrical and mechanical equipment.

Figure 3: FLIR AX8 Camera

The basic system comes with four (4) AX8 cameras, which can be mounted strategically to monitor large areas, or specific critical components. Cameras can be configured to monitor temperatures and watch for unexpected “hot spots”. The cameras’ built-in analysis and alarm functions work in tandem with the other system components to alert support personal when remedial action is required.

The FLIR AX8 Camera – Thermal Sensor on Steroids

The MoviTHERM MIO-8 acts as the traffic cop, or the central processing hub of your system. The MIO processes data from the cameras, and sets the digital (relay) and/or analog (4-20mA) outputs to trigger audible alarms, turn on warning lamps, launch auto-dialer alerts, , or activate any other type of electrical warning device. The device is easily configured using a browser-based configuration tool. It’s quick to set-up, and a snap to modify the response profile.

Figure 4: Multi-function I/O – MoviTHERM MIO-8

FLIR NVR – Your Window Into the Invisible

The FLIR Network Video Recorder (NVR) displays the live video feeds from the FLIR thermal cameras on a video display screen. In addition, the NVR can be configured to display on-screen warnings and alarm indications. If you enable the Video Archiving function, you can save several months of video on-board, for historical review and issue analysis. Add an Internet connection to the NVR, and your monitoring system can be access from anywhere in the world using the FLIR Cloud technology. Log in to check the live view, or review alarms remotely, using a PC, Mac, Android, or Apple iOS device running the free FLIR Cloud app.

Figure 5: FLIR NVR (Network Video Recorder)

Unlimited Interfacing Potential

Connect to warning lights, audible alarms, auto-dialers, PLC controllers — any type of electrical or control device you can imagine. The MoviTHERM Server Room Thermal Monitoring System provides the intelligent sensor capabilities, Built-in Operator Interface/video wall, and data archiving capabilities in a clean, well-organized package.

Easy to install, and easy to configure, the MoviTHERM Server Room Thermal Monitoring System is your shortest path to a robust, cost-effective, full-featured Server Room Thermal Monitoring solution!

Your message was sent successfully!

MoviTHERM2024-08-16T17:24:54-07:00Thursday, March 21, 2024|Blog|

Electrical Substation Monitoring

Your message was sent successfully!

Electrical Substation Monitoring Using Infrared

Electrical Substation is Becoming a Very Important Task

Keeping the lights on and the power distribution grid running are critical to maintaining our modern way of life. Everything depends on the power grid; from our food and water supply, to the factories, networks, security systems, and banking industries that we all rely on every day to keep our world on track. No aspect of our modern societies can function without power.

However, power utility companies are facing increasing pressures. Aging infrastructure and increasing demand for low-cost energy are putting more stress on the power grid, increasing the risks of costly and potentially devastating brownouts and blackouts. At this critical time, utilities need solid solutions to help increase capabilities, maintain reliability, while at the same time, keeping costs under control.

Figure 1: Substation face increasing technological and budgetary challenges.

MoviTHERM Substation Monitoring Solution

In order to meet these industry challenges, MoviTHERM has developed an integrated Electrical Substation Monitoring solution. Using a combination of advanced thermal imaging and proven, off-the-shelf components, the MoviTHERM Electrical Substation Monitoring system provides all the tools you need to detect problems early — before they turn into costly and potentially critical substation failures.

Figure 2: “Hot spots” in thermal images indicate signs of trouble.

FLIR A310f – The Eyes of Your System

The FLIR A310f is a ruggedized, all-weather version of FLIR’s popular A310 thermal camera. The basic system comes with six (6) A310f cameras, which can be mounted strategically around your yard. Cameras should be located to monitor temperatures and watch for unexpected “hot spots” on critical electrical components.

Figure 3: FLIR A310f Cameras

The cameras’ built-in analysis and alarm functions work in tandem with the other system components to alert substation personal when remedial action is required.

In addition, one or more of the cameras can be configured to scan for unauthorized intruder entry, increasing the security of your facility.

Electrical Substation Monitoring

MoviTHERM MIO-8 – The Brain of Your System

Figure 5: Multi-function I/O – MoviTHERM MIO-8

FLIR NVR – Your Window Into the Invisible

Figure 6: FLIR NVR (Network Video Recorder)

FLIR NVR (Network Video Recorder)

Unlimited Interfacing Potential

Connect to warning lights, audible alarms, auto-dialers, PLC controllers — any type of electrical or control device you can imagine. The MoviTHERM Substation Monitoring System provides the intelligent sensor capabilities, Built-in Operator Interface/video wall, and data archiving capabilities in a clean, well-organized package.

Easy to install, and easy to configure, the MoviTHERM Electrical Substation Monitoring System is your shortest path to a robust, cost-effective, full-featured electrical substation monitoring solution!

MoviTHERM2024-08-16T17:25:12-07:00Thursday, March 21, 2024|Blog|

Celebrating 20 Years in Thermal

FLIR had a great discussion with Markus Tarin of MoviTHERM on his 20 year career in the world of thermal, the interesting work his team has done, and looking into the future of what’s possible with FLIR technology.

More about the mentioned projects:

1) Exposing Carbon Pollution | Cool Effect

2) MTV VMA 30 Seconds To Mars MTV Video Music Awards – How did they do that? and see the result on Youtube

3) Hyperice Lab: Increased Circulation with the Vyper 2.0 vs. Standard Foam Rolling

4) Seals on Ice Wildlife Research – “Snowflake”

5) MoviTHERM IR-NDT Solutions

5) Early Fire Detection in a laundry facility

More about Markus Tarin (President & CEO of MoviTHERM):

Markus Tarin has extensive experience with visible and non-visible imaging. Tarin was the lead architect on many product development projects for defense, research, medical and industrial applications. Through his company, he has commercialized many of these developments for remote monitoring, automated thermal imaging, and non-destructive testing. MoviTHERM is a FLIR Distributor and Integrator.

MoviTHERM2024-03-26T16:27:05-07:00Thursday, March 21, 2024|News|

What is emissivity and why is it important?

What is emissivity?

If you want to measure absolute temperatures with a thermal camera, you must have a working understanding of “emissivity”.

Emissivity is a measure of how well a material radiates heat. It is the ratio of the heat radiated by the material to the heat radiated by a perfect radiator (a black body) at the same temperature. It is a dimensionless number between 0 (for a perfect reflector) and 1 (for a perfect emitter).

Temperature measurements captured by a thermal camera may seem objectively easy to understand. In reality, temperature measurements are composed of three components: transmitted energy, reflected energy, and emitted or radiated energy.

emissivity, measuring absolute temperature on an object with the IR camera

Transmitted energy is the energy component that passes through the object. A common example of energy transmission is daylight streaming through a glass window.

Reflected energy is the energy bouncing off the target and back to the camera. In much the same way a polished mirror can reflect your likeness, thermal energy can also be reflected. The degree of reflection depends on the materials and surfaces.

Emitted (or radiated) energy is energy that is intrinsic to the target. This type of energy is generated by the object or the result of the temperature difference between the object and surrounding environments. Heat energy flows from the higher temperature objects to the lower temperature objects either by conduction, convection, or radiation.

Useful examples can be found in the light from a lightbulb or heat energy from an electrical heater. These energy sources give off or emit thermal heat into the surrounding environment, acting to equalize the temperature imbalance.

In most cases, when measuring the temperature of an object, we are primarily interested in the emitted, radiant energy. Transmitted and reflected energy add a bias or measurement error to the system and degrade the accuracy of measurements. Therefore, it is useful to have a practical way to express the relationship between emissivity, transmission, and reflection.

The Emissivity Formula

The Emissivity Formula provides a means to calculate the relative intensity of the energy components. The formula is expressed as:

1 = Transmission + Reflection + Emitted

This formula is based on the idea that the sum of all energy sources (transmitted, reflected, and emitted) has a combined value of 1. Each component contributes a corresponding fraction or percentage toward the total. Since we have assumed the sum of all components is 1, we can calculate the total energy that is emitted. We can do this by simply subtracting the fractional transmission and reflection components from 1.

So, by rearranging the original formula, we arrive at this:

1 – (Transmission + Reflection) = Emitted

If accurate temperature measurement is critical, then reflected and transmitted energy must be minimized. This is needed to optimize the signal to bias ratio between the emitted energy and other energy components.

Transmission Considerations

Generally, most materials don’t transmit thermal energy or thermal radiation particularly well. For this reason, lenses for thermal cameras must be constructed from unusual and often rare materials. Materials like Germanium (Ge), Sapphire or Zinc Selenide (ZnSe).

When selecting IR lens materials, care must be taken to select the correct material based on the portion of the IR spectrum that needs to be transmitted. Generally, reflective energy tends to be more of a concern than transmitted energy. It is important to note that some plastics, especially thin plastic films, are able to transmit energy in the IR spectrum. While reflection will have more impact on measurement accuracy under most circumstances, transmission may be a consideration, depending on your application.

Reflection Considerations

If you are measuring an (infrared) opaque object, the transmission will be zero, and the emissivity formula becomes:

1 – Reflection = Emitted

This simplifies the equation, but it may not reduce the complexity as much as first imagined. While transmission isn’t common, many materials reflect thermal energy. This creates two potential issues: the first concerns getting reliable measurements from a highly reflective measurement target. The second is the impact of other heat sources in the vicinity of the object of interest.

Shiny, reflective surfaces like polished metals, are the most challenging of all. In the case of polished aluminum, transmission is zero; thermal energy does not pass or transmit directly through metals. However, reflectivity is high, as much as 0.9.

If the sum of all energy is equal to 1, and reflectivity is 0.9 or 90%, then emissivity will be very low. Emissivity could be around 0.1 or 10% of the signal. On the other hand, if the same aluminum surface has a dull and dark surface, this will dramatically reduce reflection. With low reflection, and no transmission through the material, a larger percentage of the measured thermal energy will be emitted energy.

Practically speaking, polished aluminum has an emissivity of 0.1. However, if you anodize the aluminum, you can increase the emissivity of the surface up to 0.65, or better. This depends on the metal surface finish and roughness of the anodized aluminum.

Measuring object with much less than 0.65 emissivity usually does not yield very good or accurate results anymore. However, it depends on the application, part geometry, environment and particular requirements.

Emissivity Table

The previous section underscores an important point about emissivity. The emissivity of any common material depends on its composition and on its surface characteristics. Thankfully, standardized Emissivity Tables have been compiled listing many common objects and surfaces. If you need to determine the emissivity of a particular target object, the Emissivity Tables can provide a useful reference.

Emissivity Tables are available from several sources online. A quick online search using the search term “emissivity tables” will produce several links to useful resources.

Material	Emissivity
Human Skin	0,98
Water	0,95
Aluminium (polished)	0,10
Aluminium (anodized)	0,65
Plastic	0,93
Ceramic	0,94
Glass	0,87
Rubber	0,90
Cloth	0,95

Other Factors Affecting Measurement Accuracy

The ambient temperature of the atmosphere (which is essentially reflected stray radiation) will also have some impact on measurements. If you want to optimize measurement accuracy, it’s worth setting the ambient temperature configuration in your thermal camera.

If the object temperature is close to the ambient air temperature, the environmental radiation will have more impact on accuracy. This is because the target has a lower emissivity value. The emissivity component based on the target’s radiation will occupy a smaller proportion of the measured values. Atmosphere and reflection, although lower in value, will comprise a larger proportion of the emissivity “pie”, as illustrated below.

Viewing Angle can also have an impact on temperature measurements. If your camera is mounted at an angle, a percentage of the emitted energy will be lost. The amount loss will depend on the angle. The most accurate temperature measurements will be collected when the plane of the camera’s sensor is parallel to the surface.

The more the angle increases, the less emitted energy the camera’s sensor will detect. Also, the more impact environmental radiation will have on the resulting measurements.

How Hot Objects in Proximity to your Target Can Impact Measurements

As noted earlier, the impact of reflectivity will be compounded if there are hot objects in the vicinity of your target. A hot object reflecting off the surface of a shiny object can overwhelm the much smaller emissivity output.

Bright sunlight reflecting off a smooth surface will almost always impact your measurement values. As noted previously, total temperature includes reflected energy, so reflections of hot objects will add noise and degrade results. It’s always important to keep this in mind when determining the position of the camera with respect to the target.

emissivity, energy radiated from a natural heat source

Depending on the physical characteristics of the target, hot objects may also create unexpected transmission issues. If your thermal camera can see through the target material, a hot object behind it can suddenly skew your measurements.

You need to be aware of this particularly if you want to measure the surface of some plastics. Make sure you are not transmitting a significant amount of energy through your target. You may find that you are picking up the temperatures from behind your target, rather than the temperatures of your target.

emissivity, measuring absolute temperature with a thermal camera

This article touches on some of the basics of emissivity. There are other considerations as well, such as the transmission characteristics of the lens. The atmospheric effects are based on the distance between the camera and the object, and so on.

Emissivity is just one of many considerations when evaluating the temperature accuracy and suitability of thermal imaging for your applications.

For more information, contact MoviTHERM and speak with one of our IR Specialists.

MoviTHERM2024-08-16T17:25:28-07:00Thursday, March 21, 2024|Blog|

Thermal Infrared Imaging Explained

Thermal infrared imaging requires the use of special cameras (IR cameras). The imaging sensors in these cameras are sensitive to wavelengths in the infrared region of the electromagnetic spectrum.

Thermal infrared imaging is also referred to as “non-visible” imaging, since the infrared spectrum is not visible to the human eye. This article explains the infrared imaging spectrum and the different types of available infrared cameras and detectors used to make the invisible – visible.

Infrared Spectrum

The above illustration, from left to right, shows the visible spectrum (400nm to 700nm). That is the spectrum that we can perceive as humans with our eyes. As the wavelengths become longer, we enter the near infrared (NIR) and shortwave infrared (SWIR) region 0.9µm to 1.7µm. The segmentation in the above spectrum is based on the spectral sensitivity of the infrared camera sensors used for thermal infrared imaging.

You may find a different segmentation of the infrared spectrum in general physics literature for that reason. Adjacent to the SWIR spectral band is the midwave infrared (MWIR) band.

The extended MWIR band spans from 1µm to 5µm. The MWIR region is followed by a gap that isn’t covered from 5µm to 8µm. This gap is due to very strong atmospheric attenuation in that region.

H2O and CO2 molecules tend to attenuate the infrared radiation significantly in that region. Hence, that band is not as useful for thermal infrared imaging. Then further to the right is the longwave infrared region (LWIR). It spans from 8µm to 13µm and sometimes 14µm.

To recap, there are infrared cameras or thermal imaging cameras available with special detectors for the SWIR, MWIR and LWIR bands. Each one of these cameras have their own special thermal imaging systems that they are good for.

The majority of all thermal cameras sold and used today, operate in the LWIR band. These LWIR detectors are also called micro-bolometer detectors, or short µbolo. These detectors actually do not measure photons. Instead, they convert infrared radiation to a change in electrical resistance in their detector elements.

Cameras with Micro-Bolometer Detectors

Micro-Bolometer Pixel

The illustration above depicts a single pixel in a micro-bolometer detector of a thermal camera. The pixel size is 25µm x 25µm. The pixel has thin connection leads to reduce thermal bleed pixel element to the substrate below. Thousands of these pixels are working in conjunction to form a thermal image in a thermal camera of this type.

One drawback of this detector type is the fixed integration time. The integration time, also referred to as the exposure or shutter time in visible camera, is the time it takes a pixel to produce a useful conversion. The pixel converts infrared radiation (heat) into a change in resistance of the pixel. The connected read out electronics then converts the change in resistance into a voltage and in turn into a temperature reading for a radiometrically calibrated camera.

Some thermal cameras used for surveillance or night vision may not be able to measure absolute temperature. These type of cameras are lacking the radiometric calibration and supporting electronic.

Example cameras that contain these type of detectors are the FLIR AX8, FLIR A35, FLIR A65, FLIR A310, FLIR A315, FLIR A615 and many handheld cameras. The detectors of these camera actually are made from a MEMS device and contain miniature thermocouple elements as their pixels. It takes a finite time to warm up the pixels. Typically between 8ms to 12ms, depending on detector type.

The materials used for these detectors are either Vanadium Oxide (VOX) or Amorphous Silicon (a-Si). These type of cameras are relatively inexpensive and range from $1,000 to $20,000 or above.

The pixel resolution of these cameras (or infrared thermal cameras in general) is still relatively low. Resolutions range from 80 x 60 pixels to 1.2Mp at the date of this article. A camera without calibration can only display relative hot/cold image information.

Cameras with Photon Based Detectors

Higher-end infrared cameras come with a semiconductor detector that is capable of converting photons into electrical signals. Detectors are available for all thermal bands. (SWIR, MWIR and LWIR).

These detectors are made from exotic materials and are very expensive to manufacture. Hence, cameras of this type are more expensive than their micro-bolometer counterparts. These detectors are extremely sensitive and therefore need to be cooled.

Shortwave Infrared Cameras – SWIR

These cameras have a photon converting detector made from Indium Gallium Arsenide (InGaAs). The cooling methods for these cameras range from non-cooled, thermo-electric cooled (single, double, triple stage) to cryogenically cooled for high-end scientific grade cameras. These detectors are sensitive in the 0.9µm to 1.7µm region.

Typical applications range from spectral imaging for agriculture, plastic inspection, enhanced night vision to ultra-high temperature furnace monitoring or laser weld inspection. These cameras still see a significant amount of reflected light and only start to see true thermal effects at higher surface temperatures. An example camera is the FLIR A6260sc.

Midwave Infrared Cameras – MWIR

MWIR cameras use a detector made from Indium Antimonide (InSb). These are exclusively cryogenically cooled. Modern cameras have therefore a Stirling cooler built into the camera body and do no longer require external cooling gas.

These cameras are great for taking thermal measurements rapidly fast. Since their detector is photon based, integration times of usec or msec can be achieved.

These detectors are capable of detecting temperature changes in the 0.018mK range. MWIR cameras have a very wide application range. To list a few examples: Optical Gas Imaging, Precision, high-speed temperature measurements, Military applications, Automated Thermal Imaging, Plastic Film Inspection, Microscopy etc. An example camera is the FLIR A8300sc series.

Longwave Infrared Cameras – LWIR

Camera in this category used to be equipped with a HgCdTe or Mercury Cadmium Telluride detector. These heat sensor camera detectors are extremely expensive, pushing camera prices beyond $150,000. These detectors are also very non-linear, making these cameras difficult to calibrate and work with.

A new detector technology has made its way into the market. The SLS or Super Lattice Structure detector. It is not quite as sensitive as the HgCdTe detector, but much less expensive and much more linear.

These type of cameras come into play, if the longwave infrared region is of interest to the application, but a faster integration time and more sensitivity is required. An example camera is the FLIR A6750SLS.

Example Application for Thermal Infrared Imaging

Thermal Imaging of Printed Circuit Board

The image above is a thermal image taken with a microbolometer camera type. The bar on the right hand side indicates the temperature range of the thermal image. The orange color indicates a hot component – in this case a resistor. The rest of the circuit board is blue in color, associated with a much colder temperature.

Printed circuit board inspection is a very common use for thermal imaging. It allows the visualization of temperature. In other words, it allows for a non-contact method of temperature measurement.

Using a thermal camera for printed circuit board inspection can aid with troubleshooting as well as thermal design for thermal management in board design. In addition to a thermal camera, the user will also need a capable thermal imaging software to support the effort.

Thermal Infrared Imaging Cameras do not rely on external illumination. They can “see” heat and can be very useful wherever non-contact temperature measurements are of interest.

If you need help with selecting the right camera for your next application, please do not hesitate to contact us with any of your question regarding thermal or infrared imaging!

MoviTHERM2024-08-16T17:25:39-07:00Thursday, March 21, 2024|Blog|

VMA’s 30 Seconds to Mars’s Live Performance

In this video, we’re going to show you the technology that was used in the 30 Seconds to Mars live performance during the MTV Video Music Awards 2017.

A lot of you were interested in learning more about how this effect was achieved. We were using a FLIR HD thermal camera like the FLIR A8300sc. And we had four of those on set during the live performance. We have an HD SDI video output capable of streaming 720p at 60 frames per second. This is the standard for broadcast equipment. During the show, we had this directly connected to the MTV broadcast equipment and we were controlling the camera using the Gigabit Ethernet port with our custom written software. Here’s a view of the camera image from the custom MoviTHERM software interface.

It’s important to understand that thermal cameras respond to the heat signature of the subject. The lights can be off or on it doesn’t matter. The cameras don’t respond to visible light reflecting off the subject like regular video cameras, they only respond to temperature. Human body heat or active heat sources like the propane torch will appear brighter in the image. Cooler surfaces such as the back walls appear dark unless they’re lit up by the propane torch. Notice that the propane flame is quite small in the visible image but looks very large and the thermal image is a result of the heat energy.

30 Seconds to Mars MTV VMA Jared Leto during the live performance

One interesting effect can be achieved by breathing into a cloth over the mouth as shown here this is one of the effects used in the live show. The custom MoviTHERM software enabled the technicians to tune the temperature sensitivity of the cameras to specific temperature ranges. These ranges were fine-tuned to optimize the colors and then adjusted in real-time to closely match the changing body temperatures of the live performers. Multiple temperature range presets and crossfade options are included in the software to further automate the camera’s response.

In collaboration with a world-class rock band, experienced creative professionals, talented choreographer and skilled video production staff the MoviTHERM team was able to dial in the dramatic colors and effects that appeared in the live MTV VMA performance.

MoviTHERM2024-08-16T17:25:49-07:00Thursday, March 21, 2024|Blog|

Previous 456 Next

Infrared Cameras

Enclosures

Pan-Tilt Units

MoviTHERM I/O Series

Black Bodies

Discover the Power of Thermography!

Articles, Videos, and More

Our Blog

The Thermal Review Podcast

Newsletters

MoviTHERM's YouTube Channel

Guidebooks, Webinars, & More

Support Articles

Our Expertise

Feasibility Studies

Problem Solving

Commissioning & Training

About MoviTHERM

visit our youtube channel

For Product & Solution Demos

Follow Us

Infrared Cameras

Enclosures

Pan-Tilt Units

MoviTHERM I/O Series

Black Bodies

Discover the Power of Thermography!

Articles, Videos, and More

Our Blog

The Thermal Review Podcast

Newsletters

MoviTHERM's YouTube Channel

Guidebooks, Webinars, & More

Support Articles

Our Expertise

Feasibility Studies

Problem Solving

Commissioning & Training

About MoviTHERM

visit our youtube channel

For Product & Solution Demos

Follow Us

About MoviTHERM

Seal Inspection Using Thermal Cameras

Seal Inspection Using Thermal Cameras in Your Process Line

How is a thermal seal created?

Induction Sealing of Bottle Caps

Platen Heat Sealers

Band Sealers

Ultrasonic Sealers

The Need for Inspection

The Importance of the Inspection Location

Why does this matter?

Application Story – Paper Bag Seal Inspection

Thermal Bag Seal Inspection – Conceptual Setup

Pass-Fail Detection with Respect to Inspection Location

Good Seal Example

Faulty Seals Example

Common Challenges in Thermal Bag Seal Inspection Applications

What is flash thermography?

Flash Thermography NDT Technique

Example Configurations of Flash Thermography Systems

How is a flash thermography measurement performed?

Signal Processing – The key to achieving good results!

How large of an area can be inspected?

Spatial Resolution of Camera vs. Smallest Defect Size

Part Geometry

Depth Limitation

Example Flash Thermography Application

Do you have parts that could benefit from a flash thermography inspection?

Download Our Starter Guide

For Infrared NDT Systems

Thermography Terms

Glossary of Thermography Terms

Absorption

Ambient

Atmosphere

Autoadjust

Autopalette

Blackbody