FLIR A6750sc SLS, A6700sc & A6750sc MWIR Cameras
Designed for electronics inspections, medical thermography, manufacturing monitoring, and non-destructive testing, the camera is ideal for high-speed thermal events and fast-moving targets. Short exposure times allow users to freeze motion and achieve accurate temperature measurements. In fact, the camera’s image output can be windowed to increase frame rates to 480 frames per second to accurately characterize even higher speed thermal events, helping ensure critical data doesn’t get missed during testing.
A6750sc cameras stream temperature-calibrated data over Gigabit Ethernet to a PC for live image viewing and recording. Using FLIR’s ResearchIR software, researchers and scientists can easily monitor, acquire, analyze, and share data. In addition, extender rings for zoomed-in fields of view make the camera perfect for imaging small thermal targets, and close-up lenses can detect spot sizes down to 15um per pixel – well beyond the capabilities that lower performance IR cameras are able to achieve.
This camera model is end of life (EoL).
We do not recommend this for new projects.
This camera series is being replaced by FLIR A6xxx Series.
Get Started Today
Get in touch with our experts for a free consultation, or get a free quote. We will get back to you as quickly as possible.
FLIR A6750sc Infrared Camera Features
A6750sc SLS Features:
- Excellent image quality: 640 × 512 pixels
- High sensitivity:
- High speed image acquisition: Up to 4.1khz in windowing mode
- Synchronization: with other instruments and events
- Wide temperature ranges up to +2000°c
- Wide choice of optics
- Matlab compatibility
A6700sc & A6750sc MWIR Features:
- Excellent image quality: 640 × 512 pixels
- High sensitivity:
- High speed image acquisition: Up to 4.1khz with A6750sc and up
to 480hz with A6700sc in windowing mode - Synchronization: with other instruments and events
- Extender rings available
- Wide choice of optics
- Very low noise: FLIR built cryo cooler and insb detector
Specifications of FLIR A6700sc Infrared Cameras
| Model Number |
FLIR A6750sc SLS |
FLIR A6700sc MWIR |
FLIR A6750sc MWIR |
Detector |
|||
| Detector Type | Strained Layer Superlattice (SLS) | FLIR Indium Antimonide (InSb) | |
| Spectral Range | 7.5 – 9.5 μm | 3 – 5 μm or 1 – 5 μm | |
| Resolution | 640 × 512 | ||
| Detector Pitch | 15 µm | ||
| NETD | |||
| Well Capacity | 7.2 M electrons | ||
| Operability | >98% | >99.8% ( >99.95% typical) | |
| Sensor Cooling | FLIR Closed Cycle Rotary | ||
Electronics / Imaging |
|||
| Readout | Snapshot (FLIR 4 Channel) | ||
| Readout Modes | Asynchronous Integrate While Read; Asynchronous Integrate Then Read |
||
| Synchronization Modes | Sync In, Sync Out, Trigger In | Frame Sync | Sync In, Sync Out, Trigger In |
| Integration Time | 480 ns to 687 sec | ||
| Frame Rate (Full Window) | Programmable 0.0015Hz to 125Hz | Programmable 0.0015Hz to 60Hz | Programmable 0.0015Hz to 125Hz |
| Subwindow Mode | User Defined Size, Centered in Image | ||
| Max Frame Rate (@ Min Window) | 4,175Hz (16 x 4) | 480 Hz | 4,175Hz (16 x 4) |
| Dynamic Range | 14-bit | ||
| Digital Data Protocol | Gigabit Ethernet (GigE Vision 2.0) | ||
| Analog Video | NTSC, PAL | ||
| Command & Control | Gigabit Ethernet and RS-232 | GenICam and RS-232 | |
Measurement |
|||
| Standard Temperature Range | -20°C to 650°C (-4°F to 1,202°F) | -20°C to 350°C (-4°F to 662°F) | |
| Optional Temperature Range | Up to 1,500°C (2,732°F) Up to 2,000°C (3,632°F) |
||
| Accuracy | ±2°C or ±2% of Reading | ||
Optics |
|||
| Camera f/# | 2.5 or 4.0 | ||
| Available Lenses | 13mm, 25mm, 50mm, 100mm, 200mm | 3-5μm: 13mm, 13mm (low distortion), 25mm, 50mm, 100mm (all lenses are f/2.5) 1-5μm: 25mm, 50mm, 100mm (lenses are f/2.5) |
|
| Microscopes | N/A | 1× (this lens is f/4 and requires an f/4 camera) | |
| Focus | Manual | ||
| Filtering | Behind the Lens, Custom Cold Filtering | Removable Behind the Lens or Permanent “cold” Filter Available |
|
Image Presentation |
|||
| Analog Palettes | Grayscale + Color | Selectable 8-bit | |
| AGC | Manual, Linear, Plateau Equalization, DDE | ||
| Zoom | Video Zoom is Auto Selected: Full Res = 1x, 1/4 Res = 2x |
Video Zoom is Auto Selected: 1× for Full and 1/2 Window, 2× for 1/4 window |
|
General |
|||
| Operating Temperature Range | -40°C to 50°C (-40°F to 122°F) | ||
| Storage Temperature Range | -55°C to 80°C (-67°F to 176°F) | ||
| Altitude | 0 to 10,000 Feet Operational; 0 to 70,000 Feet Non-Operational |
||
| Shock / Vibration | 40 g , 11 msec ½ sine pulse / 4.3 g RMS Random Vibration, All 3 Axis |
||
| Power | 24 VDC ( < 50 W steady state) | ||
| Weight without Lens | 5 lbs | ||
| Size (L × W × H ) w/o Lens | 7.7” × 4.0” × 4.0” | 8.5 × 4.0 × 4.3” | |
| Mounting | 2 × ¼”-20, 1 × 3/8”– 16, 4 × 10/24 | ||
A6700sc & A6750sc MWIR:
Focal Length |
FOV |
F Number |
Spectral Band |
| 13 mm | 40.5° × 32.9° | f/2.3 | 3.0 – 5.0 µm |
| 25 mm | 21.7° × 17.5° | f/2.3 | 3.0 – 5.0 µm |
| 50 mm | 10.9° × 8.8° | f/2.3 | 3.0 – 5.0 µm |
| 100 mm | 5.5° × 4.4° | f/2.3 | 3.0 – 5.0 µm |
| Close Up 15µm | 9.6° × 7.7° | f/4.0 | 3.0 – 5.0 µm |
| 25 mm | 21.7° × 17.5° | f/2.3 | 1.0 – 5.0 µm |
| 50 mm | 10.9° × 8.8° | f/2.3 | 1.0 – 5.0 µm |
| 100 mm | 5.5° × 4.4° | f/2.3 | 1.0 – 5.0 µm |
