FLIR PTU D48E Standard for Payloads up to 15 Lbs
The PTU D48E is the next-generation configuration of the popular PTU D48 model. It is designed for high-speed, accurate positioning of camera, laser, antenna or other payloads to 15 lbs. The E-Series electronics include integrated Ethernet, improved motion performance, programmable ranges of motion, and more.
The PTU-D48E features internal wiring with slip-ring for 360-continuous pan. Bracketing options include top, side, and side+top. A single mil-style connector carries all pan-tilt and payload signals, providing simple and reliable installation and operation.
Highlights:
- Payloads to 15 lbs
- Small form-factor
- Under 12 lbs.
- Tilt position resolution of 0.003°
- Pan speeds up to 100° / Sec.
- Wide range DC voltage input
- Built-in Ethernet
- Programmable ranges of motion
We’re here to help you!
We are an official partner!
20+ years experience!
Call us to learn more!
Description
The PTU D48E Series miniature, computer-controlled pan-tilt is compact and light weight, extremely rugged, fast, and precise. It features the E-Series electronics providing integrated Ethernet, improved command rates, programmable ranges of motion.
A single mil-style connector provides power and pan-tilt control, as well as pass through of payload signals via the integrated slip-ring.
The built-in command set offers both ASCII and binary formats. This command set supports real-time control at very high command rates with very low and predictable latencies. The rich command set provides fine-grained control of position (absolute and relative), velocity, acceleration and other unit functions. Geo-pointing allows units to be aimed with a latitude, longitude, altitude location. Geo-pointing is built into all E-Series models.
Pan-Tilt Unit D48E Overview
The PTU D48E is the next-generation configuration of the popular PTU D48 model. It is designed for high-speed, accurate positioning of camera, laser, antenna or other payloads to 15 lbs. The E-Series electronics include integrated Ethernet, improved motion performance, programmable ranges of motion, and more.
The PTU-D48E features internal wiring with slip-ring for 360-continuous pan. Bracketing options include top, side, and side+top. A single mil-style connector carries all pan-tilt and payload signals, providing simple and reliable installation and operation.
Highlights:
- Payloads to 15 lbs
- Small form-factor
- Under 12 lbs.
- Tilt position resolution of 0.003°
- Pan speeds up to 100° / Sec.
- Wide range DC voltage input
- Built-in Ethernet
- Programmable ranges of motion
Specifications
| Pan-Tilt Unit D48E Standard Specifications | ||
|---|---|---|
| Max Payload Weight (nominal) | 15 lbs | |
| Pan Position Resolution (°)* | 0.006° (with microstep) | |
| Tilt Position Resolution (°)* | 0.003° (with microstep) | |
| Min Pan Speed | 0.006° / Sec. | |
| Max Pan Speed | 100° / Sec. | |
| Min Tilt Speed | 0.003 °/ Sec. | |
| Max Tilt Speed | 50° / Sec. | |
| Pan Range | Nx360-continous | |
| Tilt Range | -30°/+90° | |
| Weight | 11 lbs | |
| Height | 10.46″ (with top bracket) | |
| Operating Voltage | 12-30VDC | |
| Environmental | IP67 | |
| Operating Temperature | -30°C to +70°C | |
* Pan-tilts support 1/2, 1/4, and 1/8 microstep modes as well as autostep mode, all software configurable. Quoted resolutions are for 1/8 step mode. Firmware default is 1/2 step. Torque and speeds are somewhat reduced at 1/4 and 1/8 step modes.
