-
FLIR MCS pan-tilts are designed for high-performance control with low-latency and jitter and high command rates. There are multiple ways to control the units. FLIR MCS pan-tilts support both a simple ASCII command protocol, documented in the E Series Command Reference Manual as well as a binary form of the commands, supported by a portable C language library (PTU-SDK). The PTU-SDK is provided as source code and can be compiled on any computing platform. It allows applications to send commands to the pan-tilt over serial or Ethernet interfaces seamlessly. (Compatible with PTU‐D48E/D100E/D300E/E46 models) -
Key Features
- High speed unit, speed up to 100 deg/sec.
- Health and usage monitoring
- Embedded web server
- Dual HD-SDI output along with dual GigE pass through connections available.
- Continuous 360° rotation
- Serial or Serial over IP control
- IP67, MIL-STD-810 salt/fog & CE rated
- Payload Weight – Fixed 75 lbs. (total)
- Payload Weight – Mobile 50 lbs. (total)
- Reliable, high level of accuracy
- 10-bit linear response velocity control
- Direct control using Deg/Sec speed command.
- Multiple payload communication ports:
- 4 configurable serial, 2 TTL and 1 IP port
- Virtual serial connection using a single IP connection
- High communication rate over serial control for stabilization and tracking applications.
- Geo-positioning/ Geo-Targeting
- Dual protocol – Quickset PTZ Protocol and PELCO-D protocol
-
Key Features
- Supports Serial and Ethernet communication.
- Portable C++ complied library
- Sample command line application included in package
- Extensive documentation
- Available for all MPT series products
-
Key Features
- Embedded web server
- Serial or Serial over IP control
- Health and usage monitoring
- HD-SDI slip ring models available
- Continuous Rotation available
- Multiple payload communication ports:
- 4 configurable serial, 2 TTL and 1 IP port
- Virtual serial connection using a single IP connection
- Payload capacity up to 75 pounds
- Provides up to 50-foot pounds of elevation torque
- High communication rate over serial control for stabilization and tracking applications.
- Geo-positioning/ Geo-Targeting
- Dual protocol – Quickset PTZ Protocol and PELCO-D protocol
-
Key Features
- Payloads up to 1260 lbs, tilt torque up to 500 lb-ft. (678 Nm)
- Welded aluminum housing and hardened steel gearing for durability in harsh environment
- Embedded web server
- Two GigE pass-through wiring paths direct to payload
- Health and usage monitoring
- Serial (up to 99Hz) or Serial over IP control
- Multiple payload communication ports: 4 configurable serial, 2 TTL and 1 IP port
- 10-bit linear response velocity control
- GPS capability
- Marine configuration that meets IP67 standards
-
Key Features
- Embedded web server
- Serial or Serial over IP control
- Health and usage monitoring
- HD-SDI slip ring models available
- Continuous Rotation available
- Multiple payload communication ports:
- 4 configurable serial, 2 TTL and 1 IP port
- Virtual serial connection using a single IP connection
- Payload capacity up to 100 pounds
- Provides up to 90-foot pounds of elevation torque
- Tabletop design accommodates a wide variety of payloads
- High communication rate over serial control for stabilization and tracking applications.
- Geo-positioning/ Geo-Targeting
- Dual protocol – Quickset PTZ Protocol and PELCO-D protocol
-
Key Features
- Full ‘Node‘ Control
- Pan/Tilt Control
- Pan/Tilt Setting & Configuration
- Camera & Lens Control
- Video display of multiple streaming video feeds (**NOTE: Video display is available on Windows-based installations only at this time)
- Tours managed in the application and Tours managed in the pan/tilt
- User Configurable Look and Feel
- User selectable views
- User selectable colors, fonts, and font sizes
- User definable layout
-
Key Features
- Payloads up to 130 lb ft
- Analog driven or Digital Serial Integrated Controller (IC) models
- Internal wire table top for pass-through or IC sensor wiring on certain models
- Fixed, Inverted or Mobile Installations
- Mil-Spec Connectors
- Tough metal housing and gearing for durability in harsh environments
-
Key Features
- Payloads up to 20 lbs-ft. (27.1 Nm) on stepper motor models, 8 lbs-ft. (10.8 Nm) on brush motor models
- Analog driven or Digital Serial Integrated Controller (IC) models
- Mounting platforms include plain formed table top and table top with single tilt-axis connector
- Internal wire table top for pass-through or IC sensor wiring on certain models
- Fixed, Inverted or Mobile Installations
- Mil-Spec Connectors
- Tough metal housing and gearing for durability in harsh environments
- Marine configuration that meets IP-67 standards
- Shock & Vibration Mil-spec tested.
-
Key Features
- Payloads up to 500 ft-lbs (678 Nm)
- Analog driven or Digital Serial Integrated Controller (IC) models
- Fixed, Inverted or Mobile Installations
- Mil-Spec Connectors
- Tough metal housing and gearing for durability in harsh environments
- Marine configuration that meets IP-67 standards
-
Key Features
- Payloads up to 50 lb-ft. (68 Nm)
- Analog driven or Digital Serial Integrated Controller (IC) models
- Mounting platforms include plain formed table top, table top with single tilt-axis connector and 4 connector Universal models
- Internal wire table top for pass-through or IC sensor wiring on certain models
- Fixed, Inverted or Mobile Installations
- Mil-Spec Connectors
- Tough metal housing and gearing for durability in harsh environments
- Marine configuration that meets IP-67 standards
- Pressurized housing available with formed table top models
-
Key Features
- Payloads up to 90 lb ft (122 Nm)
- Analog driven or Digital Serial Integrated Controller (IC) models
- Mounting platforms include plain formed table top, table top with single tilt-axis connector and 4 connector Universal models
- Internal wire table top for IC or pass-through sensor wiring
- Fixed, Inverted or Mobile Installations
- Mil-Spec Connectors
- Tough metal housing and gearing for durability in harsh environments
- Marine configuration that meets IP-67 standards
- Thermostatically controlled heaters standard
-
Unleash the full potential of your Seek G300 IR Camera with the exclusive G300 Accessory Kit. Designed to complement and elevate your monitoring setup, this kit includes essential components to ensure seamless operation and extended functionality. Includes:- PoE injector
- M12 ethernet cable
- 1mm RJ45 ethernet cable
- (3) regional plugs
-
Highlights:
- 320 x 240 thermal sensor
- -4°F to 1,022°F (-20°C to 550°C) detection range
- Web browser set up, configuration, and viewing
- Power and communication over Ethernet
- On-camera analytics and alarm functionality
- IP67 rating for harsh environments
-
Side payload mounting bracket for use with top mount bracket. -
Standard payload mounting bracket for PTU-D300 (top or side) -
Single bracket for D100, side only.
-
Various mounting brackets and mounting accessories are available to allow our Housings and Pan/Tilt to be installed in any position. Wall mounting brackets, pole mount adapters, corner mount adapters, column spacers, manufactured from AISI316L stainless steel, these accessories have been designed to meet every mounting requirements in the most severe and corrosive environments. -
Thermal Camera Accessory Kit (includes POE Injector, 5m M12 ethernet cable, 3m RJ45 ethernet cable) -
Designed for 24/7 thermal monitoring of all your critical assets. TNC100 combines visible and thermal cameras into a durable housing that is suitable for both indoor and outdoor applications. The 256 x 192 thermal resolution of this camera is digitally enhanced, and offers blending with 3 modes of fusion with visible light to provide superior image clarity. The wide 56° or 90° field of view options is ideal for large monitoring coverage over moderate distances. This camera comes equipped with a fault relay switch to ensure failsafe operation in critical monitoring applications. -
The mini dual-vision thermal imaging camera is a product specially designed for real-time temperature monitoring of assets in close quarters, such as inside equipment cabinets. It has a built-in HD visible camera, visible LED illuminator, and an infrared thermal imaging core to support 24H non-contact online temperature monitoring and visible inspection. -
Designed for 24/7 thermal monitoring of all your critical equipment and other valuable assets. TNC200 combines visible and thermal cameras into a durable housing that is suitable for both indoor and outdoor applications and supports operation in a wide range of environmental temperatures. The 200 series offers high 640 x 512 thermal resolution and industry leading temperature precision with low NETD for crisp thermal imagery. The 200 series is offered with a wide selection of lens options to tailor this camera to your monitoring solution. -
The compact dual-vision thermal imaging with 256 x 192 resolution. Available with 56° or 90° field of view options, for large monitoring coverage in small areas. It has a built-in HD visible camera, visible LED illuminator, and an infrared thermal imaging core to support 24H non-contact online temperature monitoring and visible inspection. -
Pan-Tilt Mount Temperature Monitoring with Infrared and Visual Cameras
PTZ Thermal Imaging Camera equipped with high-resolution visible and infrared vision. The pan tilt thermal camera provides crisp radiometric images. Designed to monitor critical assets this PTZ camera will see problems before they become costly failures; preventing downtime and enhancing worker safety. Features:- 360° Rotating pan tilt for wider monitoring area
- Temperature accuracy of ±2°C
- Intelligent high/low temperature tracking, comparative measurements, and fire detection
- Alarm condition detection, relay control, and network broadcasting features
- Supports widely adopted IIoT protocols
- NDAA Compliant
- PlanckView camera management software and full function SDK available
